Technoline WS 9611-IT Instruction Manual download pdf (Page 6)

the order of set-up, i.e. the first transmitter will have the temperature displayed with

the number 1 against it and so on.

5. Before all the transmitters are set up, there is a testing period, during which the

display switches quickly between all the received transmitters at random, according

to which random transmission it receives. Pressing any key will stop this process.

The process also stops automatically if up to 3 transmitters are received or no keys

are pressed for a few minutes.

6. Once the remote temperature has been received and displayed on the Weather

clock, the DCF-77 time code reception is automatically started. This takes typically

between 3-5 minutes in good conditions. This time period is an excellent

opportunity to locate the transmitter(s) in suitable location(s) outdoors. In order to

ensure sufficient 433 MHz transmission however, this should under good

conditions be no more than 100 meters from where the Weather clock will be finally

positioned (see notes on “Positioning the temperature transmitter” and “433

MHz Reception”).

7. If after 10 minutes, the DCF time has not been received, use the SET key to

manually enter a time initially The clock will automatically attempt to receive the

DCF time at each full hour. When this is successful, the received time will override

the manually set time. The date is also updated with the received time. (Please

refer also to notes on “DCF-77 Radio controlled Time” and “Manual Time

Setting”).

1 2 3 4 5 6 7 8 9 10 11 ... 38 39

No comments

Technoline WS 9611-IT Instruction Manual Page 6